1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New Tomato Beta - 100103_1-28-1807 & 100103_1_28_1803_ND

Discussion in 'Tomato Firmware' started by pharma, Jan 9, 2010.

  1. pharma

    pharma Network Guru Member

    A new Tomato beta is available for testing:
    http://www.polarcloud.com/tomato



    Changelog:

    * Change back udhcpc behavior when renewing. May help in problems where initial request is ok, but not renew.
    * Warn if saving an empty Access Restriction since it's the same as blocking everything.
    * Add option in Admin:Access to select which menus are permanently expanded.
    * Increase PPPoE username and password length.

    Enjoy,
    Pharma
     
  2. landa

    landa LI Guru Member

    A new beta

    beta_100110_1-28-1806.7z
    beta_100110_1-28-1805_ND.7z
    beta_100110_1-28-1806_source.tar.bz2

    * More fixes for udhcpc. Thanks to fedor for his help.
    * In GUI, prevent '.' in numeric fields, but allow as port set separator.
     
  3. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Just a reminder that if you've overclocked you will do yourself a favor and reset the speed back to default prior to updating firmware.
     
  4. Toastman

    Toastman Super Moderator Staff Member Member

    The new beta:

    Assigning port ranges in QOS seems to have a problem here. My assignment of ports 7000-12100 for shoutcast was being rejected by the GUI checker. Looking further, seems that all ranges are no longer being accepted. As this seems unlikely, can someone else check please?
     
  5. jsmiddleton4

    jsmiddleton4 Network Guru Member

    I don't use QOS so can't help trouble shoot that. So far "basic" functions and WDS seem fine.
     
  6. Toastman

    Toastman Super Moderator Staff Member Member

    Thanks! If QOS is enabled, and an attempt is made just to enter a rule with, say, destination ports TCP/UDP 7000-7001 the GUI rejects it when you try to save the rule. I just can't believe that nobody else is reporting it, but I can't see that it's anything I'm doing. Seems to me it's a bug introduced along with the use of . as a separator and that the "-" is no longer accepted.

    Anyone care to test it to confirm please?
     
  7. kamatschka

    kamatschka Network Guru Member

    I flashed my WRT54GS v1.1 with the new Beta and I get really weird Problems..

    I noticed that, when I connect my Xbox throug a Network-Cable the WiFi connection on my Notebook gets cut. So my notebook says "No Connection" and it wants to connect to my Router throughout wifi but it need quiet a lot of time to get connected with the router throughout WiFi.. I will test it another time to see if this issue is reproducible.
    Sometimes it has a connection established through wifi but I cannot get an Internet connection nor can connect to the webfrontend of Tomato.


    For the rest of the Firmware I can only say that it is fast and I miss some Features like SDHC,Kaid Xlink, HTTP & FTP server but Im sure that will be added from some modders here..
     
  8. landa

    landa LI Guru Member

    New Beta

    beta_100130_1-28-1807_ND.7z
    beta_100130_1-28-1808.7z
    beta_100130_1-28-1808_source.tar.bz2

    * Fix a problem with port validation in GUI that broke in 1806.
     

Share This Page