1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New WAP54G Firmware Version : 3.05.02

Discussion in 'HyperWAP Firmware' started by SideshowBob, Jan 14, 2006.

  1. SideshowBob

    SideshowBob Network Guru Member

    Hi,

    I post this information becourse I cant find any of this at this forum.

    This is the HyperWAP section and I now but it seems to be a second HyperWRT section becourse 9 of 10 topics are HyperWRT related!!! :thumbdown:

    Look at the link for original Linksys firmware:

    This firmware is not compatible with version 2 of the WAP54G.

    Firmware Version : 3.05.02
    Firmware Date : 12/28/2005

    http://www1.linksys.com/international/firmware.asp?intfwid=65&coid=52

    tp://ftp.linksys.com/international/firmware/WAP54G-EU%20version%203.05.03.zip


    This firmware is not compatible with version 2 of the WAP54G.


    firmware version : 3.05.02
    firmware date : 12/28/2005

    History :
    3.02.3 : initial release with SES support

    3.05.03: new release to correct the "restore" bug where, if the config is backed up,
    then loaded into a new unit, none of the wireless settings (SSID, security settings ) are
    restored from the config file.


    Enjoy!!! :cheering:
     
  2. madhatter

    madhatter Network Guru Member

  3. Mark20

    Mark20 Network Guru Member

    This firmware is not compatible with version 2 of the WAP54G.

    I works with 2 Wap54g v. 2 and a Wap54g v.3. I have install this firmware on all AP and I haven't problem, all AP works fine, also v.2. :thumb:
     
  4. Deimdos

    Deimdos Network Guru Member

    I put this firmware to my WAP54G v1 and runs well too :)
     

Share This Page