1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

newb help

Discussion in 'Cisco/Linksys Wireless Routers' started by tnflyboy, May 22, 2006.

  1. tnflyboy

    tnflyboy LI Guru Member

    hey all, i've got a WRT54G with the linksys firmware that came with it, not sure what version or anything.

    what i'm trying to do is use my iMac as a server. so i'm wanting to route all of the incoming traffic to a given IP on the network and i'm not really sure how-to go about doing this. any and all help would be greatly appreciated. :D
     
  2. michaels7671

    michaels7671 LI Guru Member

    Here's how to determine which firmware version you have. Look on the bottom of the unit.

    To find out which model you have please go by the Serial Number of your WRT54G/GS. this is the only true way of finding out.

    Known serial numbers (first 4 characters) vs versions / Chipsets:


    WRT54G
    CDF0 = WRT54G v1.0 / ADM6996L Chipset / CPU 125Mhz
    CDF1 = WRT54G v1.0 / ADM6996L Chipset / CPU 125Mhz
    CDF2 = WRT54G v1.1 / ADM6996L Chipset / CPU 125Mhz
    CDF3 = WRT54G v1.1 / ADM6996L Chipset / CPU 125Mhz
    CDF5 = WRT54G v2.0 / ADM6996L Chipset / CPU 200Mhz
    CDF7 = WRT54G v2.2 / BCM5325EKQM Chipset / CPU 200Mhz
    CDF8 = WRT54G v3.0 / BCM5325EKQM Chipset / CPU 200Mhz
    CDF9 = WRT54G v3.1 / BCM5325EKQM Chipset / CPU 200Mhz
    CDFA = WRT54G v4.0 / BCM5352E Chipset / CPU 200Mhz
    CDFB = WRT54G v5.0 / BCM5352EKPB Chipset / CPU 200Mhz

    NOTE: The WRT54G v5.0 has 2Mb/8Mb Ram, it uses VxWorks OS and is incompatable with 3rd Party Firmware.

    http://www.linksysinfo.org/modules.php?name=Forums&file=viewtopic&t=10230
     
  3. tnflyboy

    tnflyboy LI Guru Member

    alrighty that's me right there

    CDF7 = WRT54G v2.2 / BCM5325EKQM Chipset / CPU 200Mhz
     
  4. tnflyboy

    tnflyboy LI Guru Member

    just updated firmware to v4.20.7
     

Share This Page