1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

No connection after Frimware update?

Discussion in 'Other Linksys Equipment' started by Mutinebullfrogs, Aug 25, 2006.

  1. Mutinebullfrogs

    Mutinebullfrogs LI Guru Member

    I have a WRT54G Router and a WPC54C wireless notebook card. For the last few months I have been having a serious connection problem. Use to get 48Mbps and a Very Good Signal strength lately have been getting 11 Hbps and Very Low Signal and tons of drop outs. Updated the firmware on the router and now can't connect to the notebook card. I'm not that proficient with the router stuff. Any help getting connected again and after connecting boosting the signal would be appreciated.
  2. Mutinebullfrogs

    Mutinebullfrogs LI Guru Member

    OK now the router won't work. lost all my Intent connections even if I bypass the Wireless G Router. The firmware update was WRT54G_4.30.5_US_code%2C5.exe. My route version is 1.XX
  3. fastpakr

    fastpakr Network Guru Member

    Have you tried rerunning the original setup utility? A few times I've had to use it to relocate a device after a firmware update because it did a factory reset in the process. Alternatively, you may be able to locate the original documentation of what the default IP is, set your pc into the same subnet and connect to it via the web page to reconfigure.
  4. ofbarea

    ofbarea Network Guru Member

Share This Page