No DNSCrypt for Tomato Shibby Mini-IPv6

Discussion in 'Tomato Firmware' started by crumb, Oct 7, 2012.

  1. crumb

    crumb Serious Server Member

    Hi, I'm running Shibby's tomato-K26-1.28.RT-MIPSR2-101-MiniIPv6 on my WRT160N v3, and found that it does not have a web GUI for DNSCrypt. Also dnscrypt-proxy binary is nonexistent on the firmware.
    Other than that, I think Shibby is great. :)
     
  2. koitsu

    koitsu Network Guru Member

    Entware offers dnscrypt-proxy:

    Code:
    root@gw:/tmp/home/root# opkg list | grep -i dnscrypt
    dnscrypt-proxy - 1.0.1-1 - dnscrypt-proxy is a slight variation on DNSCurve.
    dnscrypt-proxy-hostip - 1.0.1-1 - A tool for resolving a name before dnscrypt-proxy. It should help fighting the chicken-and-egg issue seen on routers, where dnscrypt-proxy requires
    
    There is no GUI interface for this software. You would need to write it yourself, though my recommendation would be to get used to using a CLI.
     
  3. crumb

    crumb Serious Server Member

  4. koitsu

    koitsu Network Guru Member

    Sorry, I should have been more clear: I meant a native GUI to the software (dnscrypt) itself, as in the daemon running its own webserver, etc...

    You're absolutely 100% right -- it's hard to discern without reading this thread thoroughly, but Shibby did add GUI adjustments for dnscrypt. The only conclusive screenshot I could find is here, from March 2012; I imagine the GUI has improved since then...? But I don't have a way to confirm (I don't run Shibby builds). If you run Shibby, maybe you could put up a screenshot of what the dnscrypt GUI bits look like so folks (including me :) ) would know/learn.
     
  5. crumb

    crumb Serious Server Member

    I went to the same page as the se7six guy (Basic → Network), however the setting to enable dnscrypt is missing, along with the dnscrypt-proxy binary. I'm running the latest build of the mini-ipv6 release.

    [​IMG]
     
  6. koitsu

    koitsu Network Guru Member

    I imagine the Mini-IPv6 builds don't include any "extra" software (per se) due to keeping the firmware size down, so that probably explains both things. Try a different build (Ext, etc.).
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice