1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

no-ip.com support for WRT54G?

Discussion in 'Other Firmware Projects' started by Steverino, May 27, 2005.

  1. Steverino

    Steverino Guest

    I just purchased a Linksys WRT54G. I use no-ip.com dynamic DNS and I currently run the dynamic update client on my PC. However, I'd prefer to have this client run on my Wrt54G. I've noticed the standard firmware only supports dyndns.org and tzo.com. Is there a firmware available that will add support for no-ip.com?

    Thank you,
    Steve Smith
  2. rbouchard

    rbouchard Guest

    Same for me

    Hello Steve,

    I'm exactly in the same situation as you. Have you found a solution to use DDN of No-IP on Linksys model WRT54G.

  3. marbss

    marbss Network Guru Member

  4. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Although marbss has provided the binary WRT54 compiled for the no-ip client, it will not work on stock Linksys firmware. You'll first need to flash a 3rd party firmware than put the files on the routers. Further more, it you plan on running the ipk package you'll need firmware that supports it. dd-wrt and OpenWRT both support ipkg
  5. rbngan

    rbngan LI Guru Member

    Will Thibor15c support no-ip client?
  6. Toxic

    Toxic Administrator Staff Member

    try asking in the HyperWRT forums. however Thibor is busy with other firmware builds at present.
  7. sufrano63

    sufrano63 Network Guru Member

    dd-wrt support no-ip.com

Share This Page