1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

No Webinterface after upgrading TomatoUSB

Discussion in 'Tomato Firmware' started by ppq-, Jan 6, 2011.

  1. ppq-

    ppq- Networkin' Nut Member

    Hi,

    I just upgraded the TomatoUSB on my WRT54GL from Version 1.28 build 8752 to build 8754. Build type: NoUSB VPN.
    I had a https webinterface running on a high port. After the upgrade, everything works well - except the webinterface. Access to the internet (pppoe) and SSH still works, but that's all.

    ps:
    Code:
    root@router:/tmp/home/root# ps
      PID USER       VSZ STAT COMMAND
        1 root      1052 S    /sbin/init noinitrd
        2 root         0 SW   [keventd]
        3 root         0 SWN  [ksoftirqd_CPU0]
        4 root         0 SW   [kswapd]
        5 root         0 SW   [bdflush]
        6 root         0 SW   [kupdated]
        7 root         0 SW   [mtdblockd]
       25 root      1008 S    buttons
       26 root       976 S    console
       28 root      1176 S    /bin/sh
       29 root      1168 S    syslogd -L -s 50
       31 root      1164 S    klogd
      126 root      1012 S    redial
      129 root      1168 S    telnetd -p 23
      130 root       716 S    pppoecd vlan1 -u XXXXXXXXXXX -p XXXXXX -r 1492 -t 1492 -i 0 -I 30 -N 5 -T 5 -P 0 -C pppoe_down -R -s alice -k
      134 root      1016 S    nas /etc/nas.conf /var/run/nas.pid lan
      136 root       916 S    dropbear -p 22 -a
      142 root      1184 S    crond -l 9
      147 root       768 S    rstats
      153 nobody     780 S    dnsmasq -c 1500 --log-async
      189 root      2288 S    httpd -s
      525 root       972 S    dropbear -p 22 -a
      526 root      1252 S    -sh
      550 root      1172 R    ps
    
    Looks like httpd is working, even nmap says the port is open ("service: ssl/waste?", is this normal for https?), but I can't reach the webinterface at this port.

    What's wrong? How can I fix this?


    Edit: I also posted in tomatousb.org/forum - http://tomatousb.org/forum/t-296135/no-web-ui-after-upgrade

    Edit 2: The Remote Access web interface still works! Going back to Build 52 now.
     

Share This Page