1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

no wireless signal

Discussion in 'Cisco/Linksys Wireless Routers' started by ledzeppelin166, Aug 15, 2005.

  1. my WRT54G v2 router is not giveing a wireless signal. the wlan light is off. my other computer is wired to it and it works fine. what should i do?
     
  2. howardp6

    howardp6 Network Guru Member

    Go to the wireless setting and see if the Wireless Mode has been disabled. It should be set to mixed to support both 801.2B and 802.11G clients or B-only or G-only.
     

Share This Page