1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.


Discussion in 'Cisco/Linksys Wireless Routers' started by CyberStorm, Jun 12, 2005.

  1. CyberStorm

    CyberStorm Network Guru Member

    I played with some IPTABLE commands and added them to Rc_firewall...

    Now, my WRT54G Router has trouble routing internet from Pheenet RT011 (it worked before, and it works with another WRT54G)...

    I do not know how to reset NVRAM ? ...(is it done by pressing hard reset button ? , or restoring settings to factory defaults )

    I viewed NVRAM using: /usr/sbin/nvram show > /dev/null
    but i havent found my IPTABLE LINES...

    I used PORT FORWARDING and forwarded port 80 and 8080 to ip address of my comp...and Internet started opening pages...

    I did all types of resetting my WRT but no changes...it works only when I forward ports 80 and 8080 ... WHAT TO DO ??? :?:
  2. JmJ17

    JmJ17 Network Guru Member

    Try this:

    # nvram set rc_firewall='/usr/sbin/iptables -F; /usr/sbin/iptables -t nat -F'
    # nvram commit

    This will reset all rules

Share This Page