1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

odd problem with wrt54g (same topic as on general forum)

Discussion in 'Cisco/Linksys Wireless Routers' started by X-Rayden, Jun 14, 2005.

  1. X-Rayden

    X-Rayden Network Guru Member

    i have a little big problems with my computer.

    some infos :
    Router / access point : WRT54G
    Adapter card PCI : wmp54g
    OS : windows xp sp2
    number of computers connected :
    1 wired, 3 wireless
    the wired and 2 wireless are working fine.

    first i got the "limited or no connectivity" message... meaning that i got no assigned ip from the router. it seams to have a wrong assignement.
    i tried :
    with both windows zero configuration & linksys software...
    i updated the drivers of the pci card... disabled other network card.

    i trie to brute force assigned an ip with all submask/gateway/DNSs indicated in the router configurations...

    when a force an IP i got connected to the access point, but no internet!

    have any ideas?

    p.s. : i had a wired network with smc before, now having all linksys wireless but havent formated between, and i am new to wireless... and sorry for my poor english.
  2. almond_23

    almond_23 Network Guru Member

    If you are having limited or no connectivity, make sure the Wireless Zero configuration and the linksys monitor is not running at the same time,

    1. If using the WZC, remove all preferred netoworks, and assign a wep 64 bit and type the network key not the passphrase

    2. if using the wlan monitor, most of the time, if it is using wep, u might have typed in the wep incorrectly. if you are not using wep and still does not have access to theinternet, assign static ip, and manually assign the dns servers by copying them under the staus tab of the router setu page

Share This Page