Only first Access Restriction policy works

Discussion in 'DD-WRT Firmware' started by who knows, Dec 18, 2007.

  1. who knows

    who knows LI Guru Member

    I just bought from new egg
    WRT54GL v1.1 #CL7C
    CPU ModelBroadcom BCM5352 chip rev 0
    CPU Clock200 MHz

    Reset to defaults
    30 sec reset
    upgradedd Std version (not mini first)
    it had a liitle hickup getting back to the GUI and sat with power light flashing.
    30 sec reset again, seem to get to the GUI fine.

    Ran factory firmware for a while to get the feel of things. Policies I had set to block outbound port numbers each were working.
    Now with DD-WRT, what ever I put in any policy after number 1 does not work.


    Do I need to put these into the command screen some how in order to make them stick?
    I know nothing of IP tables, or how to use them to see if something is wrong.

    My BEFSR41 seemed to be slowing things down, so i got the WRT54gl for future when I get laptop.
    But for now all I need is blocking outbound ports and able to view in/out logs.

    I think I would rather be changing a tranny on my F350
    THAT I can see.

    Maybe I should have listen to my husband and just got another BEFs model, after 3 days and numerous attempts, and before I toss it back in the box.


    Any help would be greatly appreciated
    Thanks
    Angela
     
  2. swinn

    swinn Network Guru Member

    Use DD-WRT v24 RC5.
     
  3. u3gyxap

    u3gyxap Network Guru Member

    What exactly is your policy rule #1?
     
  4. who knows

    who knows LI Guru Member

    Policy 1 (its name)
    Policy name: each policy has its own different name
    Status: ...enabled
    Pc's: ...Allow
    Edit pc's list: ....MAC addres and Ip for that MAC.
    Every day 24hrs
    Catch all P2P: ...box checked
    then a list of the service port #'s I added to block out bound attempts on port number. random blocks of port #s so that if by some chance one pc were to get infected I would lessen the threat to spread more on the net.

    After I added to the edit/add Service list I noticed sometimes when I would click on "apply" or "close" that, instead of going to "filters.asp" on main page, it would go to "apply.cgi" and be a blank page. But that was after I had already added all the service port #'s I wanted to block.


    Is there certain things in IE that MUST be turned on? I have the options on for
    Run active-x and plugins
    Script activeX controls marked safe for scripting
    Scripting applets
    allow paste operations via script
    active scripting
    And my Java is up to date 1.6

    Do I really need all these to make changes, cause usually I keep them off.

    If you are talking what some code output is saying, I have no idea of how find that out.

    blocking by key word is pretty powerful though.


    Thanks again for your help.
     
  5. u3gyxap

    u3gyxap Network Guru Member

    I personally use Firefox.
    If you don't have a rule #9, try creating one that blocks all internet access to everybody (ip 192.168.1.2 - 192.168.1.254). I must be #9.
     
  6. kodo

    kodo Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice