1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

open ports

Discussion in 'Networking Issues' started by ReDFlaG, Jun 4, 2005.

  1. ReDFlaG

    ReDFlaG Network Guru Member


    I've just bought a wag54g v2 router, and set it up properly.
    I've decided to prob my ports and have seen that some of them are stealth while other were just closed.

    Like i was using no applications (no port forwarding, no incoming allowed), i contacted linksys support. They just recognize that it is a limitation of the router, and they can't do anything about it (telling me to wait for a future firmware, a day, a year.. who knows)

    So does some of you manage to tighten the security, and successfully grab a firmware that can do the job a router should do!

  2. Toxic

    Toxic Administrator Staff Member

    do you have uPnP enabled?

    also make sure Block WAN requests are on.
  3. ReDFlaG

    ReDFlaG Network Guru Member

    i've disabled Upnp (i don't need a so unsure function), the other option is set properly.
  4. dribble

    dribble Network Guru Member

    Not recommended...

    While testing I have found that by turning off the FW function all ports become stealthed, but this means that it is not offering any form of defence.
  5. ReDFlaG

    ReDFlaG Network Guru Member

    I've done the test and it does not stealth the ports... i got the same result FW up or FW down.

    I don't understand why some port a stealthed while FW is up, and some just closed....

    Linksys should plan to fix that in their next firmware...
  6. Guyfromhe

    Guyfromhe Network Guru Member

    what ports aren't stealthed?
  7. DevilStick

    DevilStick Network Guru Member

    Other question:

    Which port scanner did you use? What protocol did you scan? UDP or TCP?
  8. ReDFlaG

    ReDFlaG Network Guru Member

  9. Guyfromhe

    Guyfromhe Network Guru Member

    figured as much, anyway what ports are you seeing as closed?
  10. ReDFlaG

    ReDFlaG Network Guru Member

    1024 DCOM
    1025 Host
    1026 Host
    1027 Host
    1028 Host
    1029 Host
    1030 Host
    1720 H.323
    5000 UpnP

    i've just done a common port scann, not probed all the ports.

Share This Page