1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Open up the Access Point

Discussion in 'Other Linksys Equipment' started by Klinstifen, Apr 8, 2005.

  1. Klinstifen

    Klinstifen Network Guru Member

    I have seen a couple posts in regards to fixing a dead access point (by way of incorrect firmware). They have mentioned shorting out some pins, but I can't figure out how to open up the access point. I have a WAP54G....how do I open it? Is there a manual or a guide somewhere?
     
  2. onlineemails

    onlineemails Network Guru Member

  3. wifistiens

    wifistiens Network Guru Member

    Get the 4 rubber feet out with a screwdriver orso
    Unscrew the 2 small screws wich you can see now in the blue part.
    Pull out the blue part ...
    The rest is pretty obvious

    The print is bolted to the rest with 3 screws , there are 4 screw holes though :) ( now you know why these thing keep getting cheaper :) )

    That's pretty much all of it ...

    goodluck ...
    JPD
    www.cabrioot.com/wifi
     
  4. Klinstifen

    Klinstifen Network Guru Member

    Ugh! I got the screws out from the feet, but how do you pull the blue thing off?

    I feel like a monkey inspecting some new high-tech rock or something. I keep scratching my head, spinning the thing around, and pulling to no avail. Please help....
     
  5. Klinstifen

    Klinstifen Network Guru Member

    I GOT IT! You just can't fear breaking it....
     
  6. wifistiens

    wifistiens Network Guru Member

    LOL ...
     

Share This Page