OpenVPN -- Connectiion Reset by Peer -- HELP!!!

Discussion in 'DD-WRT Firmware' started by Cyberian75, Apr 9, 2007.

  1. Cyberian75

    Cyberian75 Network Guru Member

    Hi guys,

    My OpenVPN server is on a WRT54GL (DD-WRT) and runs with no errors. The client, however, cannot connect and logs the following error repeatedly:
    P_CONTROL_HARD_RESET_CLIENT_V2...

    I think it's a firewall issue.

    I've added "/usr/sbin/iptables -I INPUT -p tcp --dport 1194 -j ACCEPT" to rc_firewall, and I see it in the IP table, but it's still throwing that error.

    For my configs, see www.dd-wrt.com/phpBB2/viewtopic.php?t=13702

    What could it be???

    Thanks.
     
  2. Bill_MI

    Bill_MI Network Guru Member

    From an OpenVPN on OpenWrt user (not DD-WRT) a quick look makes me think your certs and keys may need explicit paths as well as the rc_startup openvpn line to find your config file. Nothng in the log? That could be authentication problems - doesn't look like firewall.

    I recently learned about the rc_startup trick helping someone get OpenVPN running on DD-WRT in the grc groups. There was a big disconnect trying to get quote characters in the rc_startup variable but I don't see that in your case.
     
  3. Cyberian75

    Cyberian75 Network Guru Member

    The connection problem was caused by a missing "0" at the end of "tls-auth ta.key". Now the problem is that I can't use the "redirect-gateway" directive; if I do, no traffic gets through, though the client connects just fine and can even ping each other.

    Any ideas?
     
  4. Bill_MI

    Bill_MI Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice