1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

openvpn: initialization sequence completed but no internet

Discussion in 'Tomato Firmware' started by jwork123nl, Aug 21, 2012.

  1. jwork123nl

    jwork123nl Serious Server Member

    Using Tomato Firmware v1.28.0498 MIPSR2-Toastman-VLAN-RT-N K26 VPN
    Configured my Linksys E4200V1 as VPN client.

    Press start now and according to the syslog the connection is established.
    I can ping the vpn server (BolehVPN) both from the router and from devices connected
    to the router.
    But: that is the only thing I can do. I have absolutely no internet connection whatsoever.

    The whole thing work like a charm setup on my Linux pc with the openvpn package.
    But I want it on the router, it is the reason that I installed tomato in the first place.

    My thought was that there might be an error in the routing- see below.
    Let me know if you need more input...

    Here is the output of ip route show before and after establishing the connection

    ****** Without VPN client service

    root@unknown:/tmp/etc/dnsmasq# ip route show
    89.98.128.1 dev vlan2 scope link
    89.98.128.0/24 dev vlan2 proto kernel scope link src 89.98.128.155
    192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
    127.0.0.0/8 dev lo scope link
    default via 89.98.128.1 dev vlan2


    ****** Running VPN client service
    root@unknown:/tmp/etc/dnsmasq# ip route show
    217.168.16.25 via 89.98.128.1 dev vlan2
    89.98.128.1 dev vlan2 scope link
    89.98.128.0/24 dev vlan2 proto kernel scope link src 89.98.128.155
    192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
    172.16.1.0/24 dev tun11 proto kernel scope link src 172.16.1.212
    127.0.0.0/8 dev lo scope link
    0.0.0.0/1 via 172.16.1.1 dev tun11
    128.0.0.0/1 via 172.16.1.1 dev tun11
    default via 89.98.128.1 dev vlan2
     
  2. rhester72

    rhester72 Network Guru Member

    Code:
    0.0.0.0/1 via 172.16.1.1 dev tun11
    
    This is not a happy thing. Make sure that you haven't configured OpenVPN to force all traffic through the tunnel.

    Rodney
     

Share This Page