OpenWrt on WGR614l

Discussion in 'X-WRT - OpenWRT Firmware' started by alumko, May 30, 2008.

  1. alumko

    alumko Addicted to LI Member

    I want to build OpenWrt image for Netgear Router WGR614v8. From where will I get the source code?
     
  2. mona.mondal

    mona.mondal LI Guru Member

  3. alumko

    alumko Addicted to LI Member

    I have ported OpenWrt for WGR614l. But I am getting error like -

    sflash: Couldn't find valid ROM disk image
    Creating 8 MTD partitions on "sflash":
    0x00000000-0x00020000 : "boot"
    0x00020000-0x003b0000 : "linux"
    0x00000000-0x00400000 : "rootfs"
    0x003b0000-0x003c0000 : "T_Meter1"
    0x003c0000-0x003d0000 : "T_Meter2"
    0x003d0000-0x003e0000 : "POT"
    0x003e0000-0x003f0000 : "board_data"
    0x003f0000-0x00400000 : "nvram"
    Initializing Cryptographic API
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 1024 bind 2048)
    ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
    ip_tables: (C) 2000-2002 Netfilter core team
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    NET4: Ethernet Bridge 008 for NET4.0
    802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    VFS: Cannot open root device "mtdblock2" or 1f:02
    Please append a correct "root=" boot option
    Kernel panic: VFS: Unable to mount root fs on 1f:02

    What is the reason?
     
  4. mona.mondal

    mona.mondal LI Guru Member

    I am also getting the same error. :mad:
     
  5. Yasha613

    Yasha613 Network Guru Member

    Have you tried the current development version?
    Code:
    svn co [url]https://svn.openwrt.org/openwrt/trunk/[/url] ~/kamikaze
    cd ~/kamikaze/
    ./scripts/feeds update
    make package/symlinks
    make menuconfig
    make world
    

    This will allow you to build the current [unstable] version and any available packages(once the appropriate development prerequisites are installed of course).
    Resources:
    http://wiki.x-wrt.org/index.php/Compile_Kamikaze_with_Webif^2
    &
    http://wiki.openwrt.org/OpenWrtDocs/BuildingKamikazeHowTo
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice