1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PAP2 configuration issue

Discussion in 'Other Linksys Equipment' started by linksys, Apr 27, 2006.

  1. linksys

    linksys Network Guru Member

    [align=justify]
    One of the customer is using PAP2. He tries to configure the device with static ip address (not sure of the details). Once he types the password as admin, the device gets locked. He is not sure how to unlock the device. Tried to use the manual reboot or the reset option. Can any one please give me the details how to configure the pap2 for a generic voip service. I would also require some troubleshooting steps.
     
  2. DesG

    DesG Guest

    Is this a Vonage Pap2? Check the model number with your customer.

    Cheers, Des.
     
  3. linksys

    linksys Network Guru Member

    The PAP2 is not used for Vonage service. Purchased and used in India. Does the PAP2 supports the fax machines?. I don't think so it does.

    Anyone could you give me the functionality difference between the PAP2 and PAP2T?
     
  4. mazilo

    mazilo Network Guru Member

    Read all posts in this thread to understand how to unlock your PAP2. Beware that the thread contains more than 2000 posts and has been extended with a new thread. If you skip posts (which I don't recommend) in the thread, be sure you know what you are doing.
     

Share This Page