1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

pap2 work in a wdsconnection

Discussion in 'Other Linksys Equipment' started by jagboy, Aug 8, 2005.

  1. jagboy

    jagboy Network Guru Member

    hey

    i was wondering if i connect my pap2 phone adapter to my wrt that was in wds would it still work. i am getting voip pretty sonn like today or tomarrow.
    here is a illustration:
    [​IMG]

    i wnte to know if the above illustration would work??
     
  2. rainerigs

    rainerigs Network Guru Member

    Yes, it will work fine but you failed to say what firmware version you are running. I have been running a PAP-2 with Vonage over a WDS link via two WRT54G's for about a year. Alchemy has worked flawlessly in this setup. Please read the following post by Justin Olanin that I found extremely helpful in setting up WDS for the first time: http://www.linksysinfo.org/modules.php?name=Content&pa=showpage&pid=7
    Just remember to forward the proper ports as Linksys recommends in their documentation and I had reliability issues using DHCP. Since I assigned the PAP-2 its own static ip all has been great. Good luck! :)
     
  3. jagboy

    jagboy Network Guru Member

    thanks for the help.
     

Share This Page