1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

picking out sveasoft firmware for wrt54g version 4

Discussion in 'Sveasoft Firmware' started by watts3000, Sep 10, 2005.

  1. watts3000

    watts3000 Network Guru Member

    Whats the best sveasoft firmware to run on a wrt54g version 4. I'm thinking into looking in using them maily becaus ehte orginal linksys firmware is not that stable. My connection is always dropped when using wpa so I was thinking that custom firmware might help.
  2. watts3000

    watts3000 Network Guru Member

    So I guess know one here knows nothing I'm talking about
  3. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Be for warned it has not been confirmed to work with a v 4.0 ans sveasoft has not officially confirmed it either. This is one of the latest models and has a different chip than previous hardware. Sveasoft gives official confirmation only when the dev team has tested the specific hardware themselves. Users will usually post when it does work but I haven't seen anything say it does. I suggest waiting, but yes sveasoft firmware is good. Have a look at dd-wrt maybe it will work, it has some really good features and would be my recommended second choice (it uses alchemy code base obviously with improvments)
  4. __nbd

    __nbd Network Guru Member

    AFAIK DD-WRT doesn't work on v4 either. Your only choices would then be OpenWrt and HyperWRT...

Share This Page