1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Please help me in SIP VoIP configuration

Discussion in 'DD-WRT Firmware' started by telemach, Nov 23, 2005.

  1. telemach

    telemach Network Guru Member

    I'm using WRT54GS v.2 with dd-wrt.v23_voip_wrt54gs.bin 11/14/05
    and I experience serious problems while using SIP based softphones.

    Once the connection is establihed I hear voice for 1 second and then it goes silent, connection is in progress but I hear nothing.

    I've tried to forward ports but no luck, SIPatH is probably what I would need but I failed using it. If I set the 'outbound proxy' for my router's IP then registration fails because as I assume router is trying to register account name with it's own IP and does not connect to my provider's SIP server.

    Is there an online manual or HOWTO configure SIP on WRT54G with dd-wrt ?

    I don't know what I'm doing wrong.

    For example I'm using X-Ten softphone

    When it is configured like this

    Domain/Realm : sip.examplesipprovider.com
    SIP Proxy : sip.examplesipprovider.com
    Out Bound Proxy :
    Use Outbound Proxy : Always


    Login failed! Contact Network Admin

    Use Outbound Proxy : Never

    registers with sip server but audio is out after fist second of connection

    Firewall is disabled

    in DD-WRT Control Panel under SIPatH-Phonebook I see

    Messaging : sip:test@

    any ideas how to make it working ?
    I am used to download and test many different softphones with many SIP accounts. Is there a way to make it working always without any futher configuration ?

Share This Page