1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Please Help!

Discussion in 'DD-WRT Firmware' started by JABenedicic, Aug 15, 2005.

  1. JABenedicic

    JABenedicic Network Guru Member

    Hi all,

    I have a WRT54G v1.1 and have been running DD-WRT for some time. I was running prefinal 3.1 and have had no problems, tonight I get home and the internet was down (NTL Fault in the area) so I thought I'd take the time to upgrade (didn't know the final release was out btw) so I grabbed the prefinal 5 that I had downloaded a while ago and set about the upgrade.

    All was looking good, but I got a message saying upgrade failed. At this point the WRT54G still worked fine but I couldn't access the upgrade page at all. So I decided to reboot to see if I could access the page and try again. At this point I realised something had gone wrong as the wireless never came back on and I couldn't access the management pages on the router at all. The power light is always flashing and it never seems to boot completely. DHCPd is still working as I get an IP address, I am unsure past that as the internet still isn't working at home (Im in the office now).

    Please help, I need to know if this can be fixed and how.

    TIA
     
  2. pasys

    pasys Network Guru Member

    you can use tftp (if you have enabled boot-wait)...if you have boot-wait enabled you can always restore back to default linksys frimware


    :drinking: cheers and :rockon:
     
  3. matthiaz

    matthiaz Network Guru Member

Share This Page