1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

plzz help with linksys ADSL2MUE ???

Discussion in 'Other Linksys Equipment' started by Osama1712, Jan 11, 2007.

  1. Osama1712

    Osama1712 LI Guru Member

    hi
    i have linksys ADSL2MUE I update but i dont kown what ver i use its look like a pic i Upload ok , but now i have very bad problem that my DSL lamb fail many time and iam sure of my tele line , i dont know where is the problem maybe the firmware i did or what if the firmware how can i update that ver or what i do plezzz help i cant do any download or work in net .
     

    Attached Files:

  2. mstombs

    mstombs Network Guru Member

    From the picture you are using the Australian? 2.17 Ti version.

    Have you performed a hard reset holding the reset button on the back in for 10s or more and then carefully re-entering all your connection details, watch out the default VCI/PCI and LLC/VC settings may not be correct for you.

    There is a setup guide on

    ftp.linksys.com/international/userguides/
    ADSL2MUE-2.18AUBridgemodesetup.doc

    which may help configuring this version of the firmware, not necessarily in bridge mode.
     
  3. Osama1712

    Osama1712 LI Guru Member

    thanx alot but can i update thes firmware and how plzz ???
     
  4. mstombs

    mstombs Network Guru Member

    I haven't used that firmware, but guess it is the one included in the screen shots here:-

    ftp.linksys.com/international/userguides/
    ADSL2MUEfirmwareupgradeprocedure.pdf

    A bigger question is what you upgrade the firmware to beta UK versions 4.19 and 4.22 can be found on this site but they have very restricted web options compared to the one you have so is that an upgrade?

    As you can see elsewhere I am testing the 3rd party RouterTech firmware, which has the potential to be very good!
     

Share This Page