1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

POE for linksys WRT54G

Discussion in 'Cisco/Linksys Wireless Routers' started by tamis, Oct 9, 2004.

  1. tamis

    tamis Guest

    I made a circuit for the linksys WRT54G in order to give power.
    The circuit i copied from here where you can see it:
    http://patraswireless.net/forum/index.php?act=ST&f=22&t=425&s=0100238e01c0d6c53bdb5e676fa0540f

    it is in greek but you all can understand it

    that circuit as you can see has an output of 12V
    i made it and i had steady 11,92V

    but when i put it in my linksys after a while it switched off.
    Then i put again its power adaptor and it worked perfectly.

    Can anyone tell me why the linksys is switching off with the i made?
    The circuit doesn't seem to have smt wrong.
    Is there any other circuit that we can construct?(i searched in the net but i didn't find anything)

    I DONT WANT TO BUY THE POE ADAPTOR THAT LINKSYS SELLS!!!
     

Share This Page