1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Port forward vs Triggered Port for Secure FTP

Discussion in 'Tomato Firmware' started by 4char, Nov 9, 2010.

  1. 4char

    4char Network Guru Member

    I have setup a FTP behind the RT-N16 running "Tomato RAF v1.28.8650". I'm try to setup the FTP using explicit SSL/TLS. I setup the FTP on port 900 (forward the port from router to internal FTP server IP) and triggered ports 41000-42000 (trigger port is 900). But that does not work. The "open data connection" will fail (timed out).

    If I change ONLY the "triggered ports" to just basic "port forward", i.e. forward both port 900 and 41000-42000 to FTP server, then everything works fine.

    I thought the port forwarding is the preferred way with this kind application, is it? Am I missing something or there's issue with the Router "Port Forwarding" feature?

    Also, I enabled the "UPnP" and "Secure Mode" if that makes any difference.


Share This Page