1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Port Redirection with QOS

Discussion in 'HyperWRT Firmware' started by MP3Stang, Jul 24, 2006.

  1. MP3Stang

    MP3Stang Network Guru Member

    I am running Thibor15c on my WRT54G V3. I have a NSLU2 running a small website on port 8081. Since I still want LAN web configuration access to the NSLU2 via http on port 80, I have setup port redirection for External port 80 to internal port 8081 to the NSLU2. That is working fine, but now I want to configure QOS and set the website upload QOS. However what port do I pick for the QOS upload from the NSLU2 website, the internal port (8081) or the external port (80)? Since the QOS is done at the Upstream WAN port, I would think it is going to be port 80. Is this right? Is the port Redirection both ways ex. (external 80 -> internal 8081) and (internal 8081 -> external 80)?
     
  2. Toxic

    Toxic Administrator Staff Member

    Both those ports however are incomming ports are they not. (your downstream)

    afaik TCP/IP doesn't work both ways on the same ports. the outgoing port with be selected at random
     

Share This Page