1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ports 0 and 1 show as closed not stealth?

Discussion in 'Tomato Firmware' started by Reiper, Mar 21, 2007.

  1. Reiper

    Reiper LI Guru Member

    Just ran a Shields Up test on the latest Tomato version (1.06) and noticed that ports 0 and 1 are now showing up as closed and not stealth? All previous versions showed all ports as stealth? Anyone else experiencing this?
  2. tomatoes123!

    tomatoes123! LI Guru Member

    all OK here (all stealthed) - except for ICMP
    Just my wrt54gl upgraded from 1.05 and saw your post:)
  3. Reiper

    Reiper LI Guru Member

    Did you happen to clear the NVRAM when you upgraded? I always do after an upgrade (even though you really don't have to) and I was thinking that by doing so the defaults are making ports 0 and 1 show up as closed instead of stealth?
  4. tomatoes123!

    tomatoes123! LI Guru Member

    No, I upgraded mine to 1.06 (from 1.05) without nvram clearing,
    and then restored the 1.05's saved settings
  5. pharma

    pharma Network Guru Member

    All closed and stealthed here based on Shields UP! website. :)
  6. Reiper

    Reiper LI Guru Member

    Well I emailed Jon about it and I'll see if he responds back... In the mean time I'll probably try going back to 1.05, setting all the settings, going to 1.06 w/o clearing nvram and see if I still have the same issue?

Share This Page