1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Possible to calculate ISP traffic on a per LAN IP-address basis?

Discussion in 'Tomato Firmware' started by wazooda, May 21, 2014.

  1. wazooda

    wazooda Network Newbie Member

    I'm running Shibby, and see that the Bandwidth stats monitor my ISP traffic (and is actually pretty close to what Cox says I use).

    With multiple kids in the house, NAS backup devices that sync over WAN, Roku's, Netflix on ipads etc., I'd like to see what IP address are using ISP bandwidth. I know the IP stats on Tomato show ALL activity (ISP + LAN), but I have SO much internal traffic, the numbers are not useful for figuring which IP address use ISP bandwidth.

    Any way to figure this out?

    Thanks for helping a newbie!

    Paul
     
  2. RMerlin

    RMerlin Network Guru Member

    Look at IPTraffic. It should be included in any recent version of Tomato.
     
  3. wazooda

    wazooda Network Newbie Member

    Thanks for the quick reply!

    I see the IPTraffic tab, but this seems to aggregate both WAN and LAN traffic. For example, total IP traffic for today shows 503GB while the WAN Bandwidth - Daily report shows 3.78GB.

    I looked for a way to filter the IPTraffic results to only show WAN data, but can't find anything.


    Here is the firmware version I'm running: Tomato Firmware 1.28.0000 MIPSR2-105 K26 USB AIO-64K

    Thanks again for any insight into this.

    -Paul
     
  4. wazooda

    wazooda Network Newbie Member

    I just saw in the Changelog that there has been many updates to the IPTraffic info since my Release 105. Flashing my router always scares me, but I'll give it a go and see if that solves it. :confused:
     
  5. Marcel Tunks

    Marcel Tunks Networkin' Nut Member

    Do you have static ip addresses for the devices in question?
     
  6. wazooda

    wazooda Network Newbie Member

    Yes. They are static. I won't be home for a few days yet to upgrade the firmware. Can I assume what I want to do is, in fact, included in newer builds?
     
  7. Malitiacurt

    Malitiacurt Networkin' Nut Member

    Flash a new version first. RMerlin fixed a bunch of bugs that Shibby integrated in version 110 (or around that). I remember old versions was counting phantom data on wireless devices that weren't even in proximity.
     
    BikeHelmet likes this.

Share This Page