1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PPPoE connection fails after power loss/power off

Discussion in 'Tomato Firmware' started by Faraway64d, Feb 22, 2012.

  1. Faraway64d

    Faraway64d Networkin' Nut Member

    Hello ladies and gents,

    I'm having an issue with TomatoUSB where, when I lose power or the router power switch is flipped, Tomato is unable to re-establish PPPoE connection. It constantly tries to reconnect to the ISP, but is unable to obtain a WAN IP address. The only way to fix this is to reset the configuration to default, and reload my configuration. I've seen similar issues in other posts but no solutions yet. This is a big problem for others on the network if I'm not around to reload the configuration and don't want to revert to Linksys' junkware, because I love Tomato.

    Does anyone know what is going on here? (Setup in my signature)
     
  2. occamsrazor

    occamsrazor Network Guru Member

    I probably won't be able to help, but I'd be interested to see the "ppp" parts of your logs when this happens, the bits that show the connection is failing.
     

Share This Page