1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PPTP Trouble with Client and UDP Traffic

Discussion in 'Tomato Firmware' started by Keith L. Dobbins, Sep 6, 2012.

  1. Keith L. Dobbins

    Keith L. Dobbins Serious Server Member

    Ok, I've setup a vpn client connection properly and can connect to my microsoft server 2003 vpn server just fine. I can reach remote devices on the server side of the vpn and can telent to what I need to. However I need to pass udp traffic for management to some of the devices and NO udp traffic is passing across the vpn tunnel. Is there something special that needs to be done on a VPN PPTP Tunnel connection to make this happen or is it not possible with the Tomato firmware? I tried the same connection on ddWRT and it behaved the same way. Just trying to get this figured out so I can connect to my WRT54GL when I need to manage devices on the other side of my VPN vs having to connect via the microsoft client. I'd like to use some remote devices that report back to my network via minimal udp traffic as well and right now that isn't going to be a possibility unless I can get udp traffic going across the vpn tunnel. I can ping all the devices and can telnet to them (Busybox linux clients) but no go on udp traffic for managment (They use port 53152 udp and a java app local on my pc to manage them).

    Thanks for any insight.

    K. Dobbins

Share This Page