1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Print server driver setup problem using XP and WPS54GU2

Discussion in 'Other Linksys Equipment' started by WPServer, Apr 27, 2006.

  1. WPServer

    WPServer Guest

    I am having a problem setting up print server driver on an XP machine

    Linksys WRT54G Router
    Linksys WPS54GU2 Print Server
    HP OfficeJet 6110
    W XP SP2 wireless connection

    I followed the linksys driver setup and it recognizes printer (HP 6110) on Port LK9591B-P1. When I try to connect it jumps back a page, the setup fails and the printer driver is removed from the XP machine.
    I reinstalled the HP printer driver on the PC and when I check the available printer ports the LK9591B_P1 is there so I check it , press apply and the printer driver disappears again.

    Two other XP machines are on this network and are printing fine through the print server.

    Any help would be appreciated.
    Thanks
     
  2. svg1

    svg1 Network Guru Member

    Thats odd . It removes the printer driver? The printer driver gets installed first then the print server driver gets installed when running the wps54 setup disk .

    If anything it should halt the installation of the print server driver not remove the printers driver since the printer driver got installed before the print server driver .

    Since its working on 2 other machines you can eliminate the printer & print server as being the problem .

    My guess is your pcs messed up in some way . Maybe try restoring the pc to a earlier time will allow it to install .
     

Share This Page