Printer issues

Discussion in 'Tomato Firmware' started by lancer1991, Aug 10, 2009.

  1. lancer1991

    lancer1991 Addicted to LI Member

    Fighting setting up my Dell Photo 720 with my Asus WL-520GU. I was able to get it to print the test page twice, problem is it prints, but the driver shows it at 99% and it never clears the print screen. When you go to Printers and Faxes it will still show one document and you can't cancel it unless you shut down and restart the Print Spooler.

    I've tried all the USB settings in Tomato I can think of. I've monkeyed with the settings of the printer i.e. print directly, spool with print immediately. Nothing seems to work.

    Using Tomato Firmware v1.25.8632 ND USB Std.
  2. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    I moved your post to your own thread, I'm sure you'll get a response if you don't bury it in another thread (hyjack)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice