1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Problem with a new WAG54G

Discussion in 'Other Linksys Equipment' started by maurizio, Jul 4, 2004.

  1. maurizio

    maurizio Network Guru Member

    My new WAG54G is making me crazy; for the first ten minutes everything works fine, and then the ADSL link go down; the unit continue retry to establish the adsl link (adsl led flash) and after a while it gave up.

    I need to switch it off and let it rest for a while to get it back to working
    (heat problem ?).

    Anybody saw anything similar ?
    Ideas ?

    Thanks,
    Maurizio
     
  2. Toxic

    Toxic Administrator Staff Member

    What firmware revision u have?
     
  3. maurizio

    maurizio Network Guru Member

    Firmware version

    I had this behaviour with the firmware originally installed on the machine
    (ehm, i haven't took note of the version).
    then i installed firmware 1.01.7 and i got the same behaviour.

    Maurizio
     
  4. Toxic

    Toxic Administrator Staff Member

  5. yonnage

    yonnage Network Guru Member

    modem update on firmware version 1.01.5

    Toxic,

    The original firmware was 1.00.7. the next release was 1.01.5 which had "modem driver updated" in its release notes. also added the error messages on the status page
     
  6. ZePe

    ZePe Guest

    FW for annex B need

    Has anybody the firmware 1.01.4 or 1.01.6.
    I would like to test this two. I read that this are the best.

    Thanks
     
  7. md3v

    md3v Network Guru Member

    1.01.6.

    Does anyone have 1.01.6?!
     
  8. yonnage

    yonnage Network Guru Member

    1.01.4

    i've never seen 1.01.4. i did have 1.01.6. when i remember to check my pc at work i'll see if i can dig it out
     
  9. md3v

    md3v Network Guru Member

    Please!

    Please please please... if you have it upload it somewhere or pass it on.

    I would GLADLY host it on my box for all to access.

    m.
     

Share This Page