1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Problem with ATA behind WRT54GL (Tomato 1.22)

Discussion in 'Tomato Firmware' started by leelee, Dec 15, 2008.

  1. leelee

    leelee Network Guru Member

    For some strange reason when I place my VOIP ATA (Sipura 2102) behind my router it will work fine for a day or two and then the ATA phone line(s) will quit working. The Line 1 registration has a status of failed. My VOIP provider is VOIPYourLife and they have been unable to help me. It works fine when I place the ATA between my modem and router, but the ATA limits my download speed.

    Here’s the kicker, they have granted me admin access to their ATA device so I can go in and change the SIP mapping at will when the connection fails. I’ll change the SIP port from 5060 to 5061 and bingo, everything works again for a day or two.

    I have port forwarding set for ports 5004, 5060-5069 and 16384-16482 (VYL recommended) on my WRT54GL. Are there any settings in the Tomato firmware that would help ?

    Any ideas/suggestions would greatly be appreciated.
     

Share This Page