1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Problem with MAC Adress

Discussion in 'MustDie Firmware' started by sevo, Sep 21, 2004.

  1. sevo

    sevo Guest

    Look in the Mac adress changes of MustDie Firmware 2.07. There is some problem
  2. BrooklynWalker

    BrooklynWalker Network Guru Member

    Interesting. I had an anomaly, too:

    I plugged the WAP54G with the MustDie 2.07rev1 firmware into the inside network on a BEFW11S4, broadcasting the same SSID as the BEFW11S4. I foiund that it advertised an additional SSID with the MAC address of the inside LAN (wired) interface of the BEFW11S4, so that a site survey would show 3 MACs with the same SSID:

    1) That of the BEFW11S4 wireless interface (normal)
    2) That of the WAP54G (normal)
    3) That of the inside LAN (wired) interface of the BEFW11S4 (NOT NORMAL???)

    Anyhow, I'm new to playing around with this hacked up firmware, so I'll keep posting my anomalous findings, if any.

  3. jackjimmy

    jackjimmy Networkin' Nut Member

    That bit is set to 0 in individual addresses and 1 in group addresses. Group addresses, like individual addresses, can be universally administered or locally administered.

Share This Page