1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Problem with Motorola WR850G behind 2Wire i38HG

Discussion in 'Tomato Firmware' started by mrralan, Jul 29, 2013.

  1. mrralan

    mrralan Networkin' Nut Member

    I have Uverse with their 2Wire i38HG. I have a Motorola WR850G connected to it. In the 2Wire, the WR850G is in the DMZ so it is getting the WAN public IP. I just set it up yeaterday. Tonight, all my wireless and wired devices lost connection. They were unable to reconnect until I rebooted the WR850G. The router was on and looked ok but I could not even log into the web interface until it was rebooted.

    When it came back up, the logs were cleared but I found many of these lines or similar ones that occured since the reboot...

    Jul 28 18:59:45 ? daemon.warn dnsmasq[94]: not giving name Dell to the DHCP lease of 172.16.0.100 because the name exists in /etc/hosts.dnsmasq with address 172.16.0.104

    Jul 28 18:59:45 ? daemon.warn dnsmasq[94]: not giving name Dell to the DHCP lease of 172.16.0.100 because the name exists in /etc/hosts.dnsmasq with address 172.16.0.103

    Jul 28 18:59:45 ? daemon.warn dnsmasq[94]: not giving name Dell to the DHCP lease of 172.16.0.104 because the name exists in /etc/hosts.dnsmasq with address 172.16.0.100

    I have static dhcp with names like Dell Dimension and Dell Latitude. Does Tomato not see past the SPACE in a static dhcp name? Are these issues what caused all my devices disconnect? I noticed the bottom of the router is very, very warm. Thanks.
     

Share This Page