1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Problem with RV042 - RV042 - AG241V2 Site-to-site connections

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Rasmus Flindt, Jan 9, 2012.

  1. Rasmus Flindt

    Rasmus Flindt Networkin' Nut Member


    I have a mainsite with a RV042 an two secondary locations with a RV042 and a AG241V2.

    I have been running a site-to-site tunnel between the two RV042 (site 1 and site 2), and this has been running without any problem, but now i try to make a site-to-site VPN between the main site (site 1) RV042 and the secondary site (site 3) with the AG241V2, and as soon as i connect theese two site, the connection between site 1 and 2 gets unstable and the internet connection on site 2 gets very slow, an ip phones connected from site 2 to site 1 get unconnected, but im still able to ping pc's from site 1 to site 2. What could be wrong? im running the latest firmware on all sites, the (RV042 are V1 hardware).

    Enclosed are the config im running.

    Please Help!

    Best Regards


    Attached Files:

  2. Sfor

    Sfor Network Guru Member

    I had some issues with the newest Cisco firmware for the RV042 v1 devices. The seems to be working much better. The 1.3.13.xx firmware does not seem to fix any significant issues. The only visible addition is the https access to the router web config.

Share This Page