1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

problem with WAG354G router and cordless telephone

Discussion in 'Other Linksys Equipment' started by amdrewjames, Apr 22, 2006.

  1. amdrewjames

    amdrewjames LI Guru Member

    I have installed the above router at my home. The problem is that when i connect it my cordless phone stops working. The line is constantly busy. I have tried another cordless phone and it still happens. I have tried a corded phone and that works fine. I have also tried disabling the wireless and the problem still occurs. It works fine with a usb modem. I just wondered if anyone else has had the same problem before i go out and buy a new router and get the same problem. any help will be gratefully appreciated.
  2. kg4mrv

    kg4mrv Network Guru Member

    I assume this is a 2.4 GHz phone?

    Ive never heard of this causing a "busy signal", but interferance is common since they use many of the same frequencies. I would recomend getting a non 2.4 GHz cordless phone.
  3. booly

    booly Network Guru Member

    have you tried to change the wireless channel ???
  4. JGHink

    JGHink LI Guru Member

    Does the changing of the frequency on router work then? My ISP told me flat that cordless + broadband = interference.

    Just took this for granted back then, but have had to look into using the wag54g for more reasons than having to share an internet connection on a LAN and wirelessly, and see that there's a lot to learn 8O

Share This Page