1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

problems setting up

Discussion in 'Tomato Firmware' started by Noz4r2, Jan 12, 2008.

  1. Noz4r2

    Noz4r2 Guest

    hello all

    im having some troubles setting up my WRT54G with the tomato firmware ,
    basicly i have a router downstairs connected to the modem, upstairs i have a couple of bits attached to the WRT54G , the modem downstairs has dhcp etc etc and has wireless all set up and all i want the tomato firmware to do is connect to downstairs using wireless and cable for everything else.

    Ive tryed turning dhcp off tomato and setting it up in what seems to me a logical mannor but its got me no where fast. I was wondering if anyone could give me the general setup in the firmware to allow me to accomplish my task.

    sorry im such a noob

    NoZ
     
  2. Kiwi8

    Kiwi8 LI Guru Member

    Try setting your WRT54G's wireless adapter as a Wireless Ethernet Bridge.
     
  3. ifican

    ifican Network Guru Member

    Easiest way for you would be to set it as a "wireless client" input all the information, ssid, key etc and make sure the dhcp range on the downstairs is different then the upstairs router.
     

Share This Page