1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

problems w/ WL ethernet bridge + WMM

Discussion in 'Tomato Firmware' started by jravac, Apr 5, 2009.

  1. jravac

    jravac Addicted to LI Member

    i have about 4 routers (WHR-HP-G54, WHR-G54S, WRT54GL, WL-520GU) using victek's latest Version of 1.23.8515ND and 1.23.8623 for the asus. the hp g54 is the AP gateway connected to cable modem, and the rest connect on WL ethernet bridge mode.

    whenever i try using WMM, it seems to cause problems connecting to the various ethernet bridges, altho connecting wireless w/ a comp directly to the hp-g54 gateway seems to be ok. i wanted to use wmm b/c we also use vonage, and occ seem to have some lag, and i was hoping the wmm would fix that, but i guess manually adjusting qos might be more stable way at this point.

    anyone else have probs w/ WL ether bridge and WMM?
  2. jravac

    jravac Addicted to LI Member

    nm, it doesn't seem to be the wmm settings as much as afterburner causing problems, which i also turned on. weird, cuz all the wireless devices are only the routers and all use broadcomm..maybe there's a bug somewhere.

Share This Page