1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Problems with connecting to Internet

Discussion in 'Sveasoft Firmware' started by ralfK, Nov 18, 2004.

  1. ralfK

    ralfK Network Guru Member


    I connected here a WRT54G and a WRT54GS (both in the AP mode) by use of WDS over WLAN. Both have the firmware Satori-4.0 v2.07.1.7sv. On the WRT54GS are 3 PC's and on the WRT54G are one PC connected and on the WAN-port is a Teledat T-DSL-modem.

    If I succeeded that the WRT54G over PPPoe with T-Online (with flatrate) connected, all PC's can connect to the Internet.
    If now the PPPoe connection is disconnected, I get the connection over PPoe only again, if I switch the power off and on or if I click under "Setup-Basic Setup" on "save setings" without change any settings. This functions however only if "setup basic Setup" Keep Alive is adjusted and I under status do not click on "connect".

    Does someone have an idea what is the problem?

    Thanks Ralf, sorry for that english
  2. ralfK

    ralfK Network Guru Member


    knows someone to when the AlchemyStablePublic announced (before Christmas?).

    Thanks Ralf

Share This Page