Iâ€™m trying to establish a VPN connection from either a static or dynamic IP address, and I canâ€™t seem to get it working properly. I have a Linksys RV016 VPN/Router. I have tried using IPSec and PPTP. IPSec just wonâ€™t connect and even when I use PPTP I get an error message: â€œError 800: Unable to establish the VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection.â€ I enabled the PPTP server on the RV016 and set up user accounts in both the PPTP User Settings and the main VPN Clients screen. Iâ€™ve used both Linksys Quick VPN Client and Windows XP VPN connection to try and establish the connection and Iâ€™m just confused on why itâ€™s not connecting properly. Below is my setup: VPN Office Linksys RV016 Static IP 184.108.40.206 Client Dynamic IP Linksys QuickVPN Alternate Office Linksys BEFSR41 Static IP 220.127.116.11 How do I configure a VPN tunnel to allow a remote user to log in that is using a IP address? Thank you.