Problems with WDS-setup

Discussion in 'Tomato Firmware' started by glennyy, Jan 27, 2007.

  1. glennyy

    glennyy Guest

    Hey!

    Have anyone a good guide to setup WDS with Tomato firmware?
    I have an WRT54GL and WRT54GS with Tomato 1.04.0944.

    I tried to set it up.

    Here is what I did:

    I choosed Wireless mode, I set it to Access Point + WDS in the first router.
    Then I entered the Wireless MAC for the 2. router (WRT54GS).

    I entered the 2. router and changed the routers IPadress to 192.168.5.1

    I set it up with the wireless settings, SSID, WPA key AES, channel and this things.
    I disable the WAN/Internet connection in the second router. (WRT54GS)

    I set the Wireless mode to WDS. (WRT54GS).

    Jan 27 17:04:04 unknown user.info kernel: br0: port 3(eth1) entering learning state
    Jan 27 17:04:04 unknown user.info kernel: br0: port 2(wds0.49153) entering learning state
    Jan 27 17:04:04 unknown user.info kernel: br0: port 1(vlan0) entering learning state
    Jan 27 17:04:04 unknown user.info kernel: br0: port 3(eth1) entering forwarding state
    Jan 27 17:04:04 unknown user.info kernel: br0: topology change detected, propagating
    Jan 27 17:04:04 unknown user.info kernel: br0: port 2(wds0.49153) entering forwarding state



    It's not seems to connect to the first router. I don't know why. Do anyone have a guide for this?

    Help me please! Thanks! :)
     
  2. GeeTek

    GeeTek Guest

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice