1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Public and private IP network

Discussion in 'Tomato Firmware' started by Keegan, Apr 19, 2012.

  1. Keegan

    Keegan Serious Server Member

    Hello everyone,
    I’m using a Linksys E4200 and the tomato-E4200USB-NVRAM60K-1.28.0497.1MIPSR2-Toastman-VLAN-RT-N-Ext build.
    My internet services provider routes a public IP network to me.
    I would like to have on one VLAN and all ports the public net 212.xxx.xxx.xxx/28 and accessible from the outside (wan) and LAN and I would like on a separate VLAN and all ports a private net 192.168.01/xx.
    Is it possible to have such a configuration with my hardware and how?
    Thank you
  2. nobody

    nobody Serious Server Member

    What you ask for is already in place by default.
  3. Keegan

    Keegan Serious Server Member

    Thank you for your reply! but how do I make the public IPs accessible from the outside … one test PC gets the correct public IP address but I cannot reach the PC from the outside

    Thanks a lot !!

    My conf is:


Share This Page