1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Public IPs can not be reached

Discussion in 'Other Linksys Equipment' started by luca2020, Oct 2, 2008.

  1. luca2020

    luca2020 Addicted to LI Member

    Hi there,

    We have just received a new router (WAG200G) and we have set it up as followed:

    NAT = Off, DHCP = Off, Firewall = Off, Router IP = the gateway the ISP gave us x.x.x.129

    Now we have be allocated 16 public IPs, x.x.x.130 to x.x.x.142

    We can't access any of our public IP addresses from the internet, but all of those public IP addresses can get out onto the internet.

    What could be the issue? We can't even ping the addresses.

    Cheers
     
  2. mstombs

    mstombs Network Guru Member

    Has been asked before, see for example

    http://www.linksysinfo.org/forums/showthread.php?p=315542

    It looks like a firmware bug introduced by Linksys, reference Ti AR7 firmware works in no-Nat mode as far as I know.

    Suggest you check with Linksys for latest firmware or return the adsl router to wherever it came from as not fit for purpose!
     

Share This Page