1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

QoS: A Few Questions.

Discussion in 'Tomato Firmware' started by TheParadox, Jan 17, 2010.

  1. TheParadox

    TheParadox Addicted to LI Member

    I'm setting up QoS after my Dad and family decided to start using limewire like mad. Anyways my issue is this. All traffic going from my computer to the router is "unclassified" I have tried adding classifications but for some reason it is not working. here's a screen shot of whats going on. Thank you.
    [​IMG]
     
  2. Toastman

    Toastman Super Moderator Staff Member Member

    Take a look at this post:

    http://www.linksysinfo.org/forums/showpost.php?p=348242&postcount=91

    Connections from 192.168.1.151 are probably your own machine accessing the web gui.
    Some connections are DNS requests
    What is on port 1024? as 192.168.1.153 is trying to connect to it.

    Connections which terminate at the router are unclassified. Such behavior is normal.
     
  3. jochen

    jochen LI Guru Member

    I think this is something with UPnP, because there is also a connection from Port 1024 with multicast address 239.255.255.250.
    Simple Service Discovery Protocol
     
  4. TheParadox

    TheParadox Addicted to LI Member

    Alright thanks guys.

    @ToastMan I understand that it is my computer accessing the web GUI but is there any way to classify it?
     
  5. Toastman

    Toastman Super Moderator Staff Member Member

    TP, the whole point of the QOS system is to classify and control the flow of data to the internet and back from the internet to your PC's. Connections to your router, that don't go anywhere, do not need to be classified as there would be no purpose to it. That is WHY they are unclassified, and why they do not appear in your default QOS class.

    The same applies when an incoming packet cannot be delivered because the target port is no longer listening.
     
  6. TheParadox

    TheParadox Addicted to LI Member

    Kind of redundant to show the connections then hah. Figured as much. Ohwell. Thanks :rolleyes:
     

Share This Page