1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

QoS and speed

Discussion in 'Tomato Firmware' started by gglockner, Aug 1, 2009.

  1. gglockner

    gglockner Addicted to LI Member

    Hi, I didn't see this posted elsewhere so I thought I'd post this tip. I have Comcast cable service and I'm using Tomato on a WRT54GL. I was getting upload speeds around 8 Mbit/s and download speeds around 200 Kbit/s, which is much lower than Comcast promises in my area. After some experimentation, I determined that QoS in Tomato Firmware (1.25) was causing the router to throttle the connection and inspect the data. When I disabled QoS, my connection speeds improved, especially upload. Thought this could be helpful to others.
  2. spicoli

    spicoli LI Guru Member

    Did you reconfigure the values to reflect your speed?
  3. Toastman

    Toastman Super Moderator Staff Member Member

    Assistance to reconfigure below:
  4. gglockner

    gglockner Addicted to LI Member

    Doh! Thanks for reminding me - I now see that the QoS bandwidth limits were causing my bottlenecks. I'll test QoS again when I get a chance.

    Edit: Just adjusted the QoS speeds to compensate for our Comcast speeds, and the speed issue has been resolved. Thanks! :knock:

Share This Page