1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

QoS setting for mumble

Discussion in 'Tomato Firmware' started by bucher, Apr 25, 2012.

  1. bucher

    bucher Networkin' Nut Member

    I looked at my QoS settings and it looks like mumble is being classified as crawl. I am a total rookie when it comes to QoS, I am using the stock setup from toastman. I am connected to a mumble server running on port 3312 on a specific IP address. This is the only mumble server I connect to. How would I add this to the QoS rules as VoIP/Game classification? Thanks!
  2. bucher

    bucher Networkin' Nut Member

    Would the easiest thing to tell it any ip address tcp/udp port 3312?
  3. Toastman

    Toastman Super Moderator Staff Member Member

    Create a new classification rule rule with Destination IP address as the mumble server's IP. Destination Port 3312. Set class to VOIP/Game. Save. Move it up the list, above the crawl classifier, but perhaps somewhere near the top. Check to see if it does what you think it should do.
  4. bucher

    bucher Networkin' Nut Member

    Thanks! I left it at any ip address, but I guess it wouldn't hurt to add the servers ip instead.

Share This Page