1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Question About Build Size For Belkin FD74301 v1

Discussion in 'Tomato Firmware' started by txnative, Feb 17, 2014.

  1. txnative

    txnative Serious Server Member

    I seen a build size of 9.3 mb of the sr1-116 AIO.trx and the other one is sr2-116-AIO.trx 9.2 mb. Do they contain all features as like my linksys e3200 AIO.bin which was 10.0 mb? If so does the RT build have both 2.4ghz and 5ghz working? If it doesn't does the RT-N build with full features and a working 2.4ghz/ 5ghz? I had been using Shibby builds and saw for some time it being there, now my son just recently bought one and the Belkin need updating badly.
     
  2. jerrm

    jerrm Network Guru Member

    4301 only has 8MB. You will need to choose a build under 8MB in size.
     
    txnative likes this.
  3. txnative

    txnative Serious Server Member

    Thank you for that response jerrm.

    The other question I had do any of the builds have full features or just a few set of features since it is only an 8 mb size and I'm not sure, do they have both ghz channels supported?
     
    Last edited: Feb 17, 2014
  4. jerrm

    jerrm Network Guru Member

  5. txnative

    txnative Serious Server Member

    Since the link is from the k26RT-N, build5x-99 directory, is this where i go for updates? If so then to the Asus RT-Nxx with USB? or back to k26?(please specify dir if possible) Do all of the builds have qos, 2.4ghz and 5ghz? I'd like to thank you for getting me this far normally I deal with my Linksys not Belkin obviously. If you could answer those question that would be great, i'll put that information into my notes.(memory) Thank you
     
  6. jerrm

    jerrm Network Guru Member

    No, use the current version. The build chart just shows which features each build contains, and that hasn't changed much.
     
    Last edited: Feb 18, 2014
  7. txnative

    txnative Serious Server Member

    I'll figure it out. Your last reply wasn't too clear as to, what does "No, use the current version." Pertain to in my last question, and I asked for something specify to a directory or link to follow if possible. Thanks for the assistance Txnative
     

Share This Page