1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Question: can BEFSX41 support multiple simulataneuos vpn connection

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by cmnypny, Feb 23, 2009.

  1. cmnypny

    cmnypny Guest

    Greetings,

    We have three BEFSX41 routers and would like to set one of them up at the main office and be able to have the other two remote ones connect at the same time.

    Is this possible.

    The main router local subnet would be 192.168.10.0/24

    The remote router sites 1 and 2 would be 192.168.11.0/24 and 192.168.12.0/24.

    We have setup two tunnels on the main router but both have the Local Secure as the 192.168.10.0/24.

    The remote sites are using 192.168.10.0/24 as the Remote Group Setup.

    Using pre-shared secret IKE

    If remote site 1 is connect and remote site 2 connects ... the main router disconnects remote 1.

    Not sure if this can be done with the current technology or if we need to get something different at the main site. Would one of the RV0(48)2 series allow this?

    Any ideas would be appreciated.

    Thanks in advance for your time in this matter.
     
  2. d__l

    d__l Network Guru Member

    The SX41 should handle two tunnels at once easily. The pre-shared keys should be different for each tunnel. The firmware should be the same in each router. Also it matters which firmware version you use. Some are much more stable than others. Most of most recent ones are fine as is the old reliable standby, 1.45.7.
     

Share This Page