1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

quick question...

Discussion in 'Tomato Firmware' started by dumbfound, Jul 17, 2008.

  1. dumbfound

    dumbfound Addicted to LI Member

    I recently updated to Tomato v1.20 on a Linksys GS54.

    My problem consists of slow websites loading on my desktop computer. My network is consist of 3-4 users all on wireless but my desktop and laptop. So my laptop and desktop are connected on the ethernet ports on the router.
    - Only happens when I leave BitTorrent on with ~800 open connection but my router allows ~4000. It'll start lagging my desktop ~1300 connection in use.
    - I would compare website loading on my desktop and Laptop my Laptop will load within second when the desktop is sluggish taking 15-20seconds to even initiate.
    - When I would turn off my P2P program is fine. My BitTorrent download // upload are not being use but just connection being use. I have 20meg up and down stream and my laptop loads pages easily.
    - no QoS on
    - no bandwidth is being use. minimum if any.

    So my question is that is there anyway to work around it so my desktop can use more connection it seems like per a user its capped to a certain amount of connections.

    This is the problem that I also had with my previous routers but worse on others tho.


    edit: I am considering in updated to Victek -1.20. How would I do it? the same how i flashed it initially? and is the performance alot better than the regular?
     
  2. azeari

    azeari LI Guru Member

    well if ur desktop's the one running bittorrent, you might've ran into the windows connection limitations..

    remember there was a patched tcpip file somewhere (=
     
  3. dumbfound

    dumbfound Addicted to LI Member

    How would I uncap connection limitations?

    edit: nevermind got it. YUP that was the problem THANK YOU!
     

Share This Page